S0910

　　Series S09 Vibration measuring instrument is divided into the bearing vibration measuring instrument and single ball vibration measuring instrument according to the type of products measured.
　　 Vibration and noise are the most important dynamic performance of rolling bearing. The vibration value is the main sentence to comprehensive assess the quality of the bearing, and the quality of bearings support a direct impact on the host's performance and life. So bearing vibration measuring instrument is a necessary instrument for bearings industry and users.
　　 Single ball vibration measuring instrument is used in single steel ball vibration measurement which is another assessment way of bearing waviness measurements. The instrument is applicable to the measurement of steel ball comprehensive performance and quality assessment of steel ball.
　　 Bearing vibration measuring instrument is divided into acceleration-type (S series) and speed-type (SV Series) from the measuring indicators. It is mainly used in vibration measurement of deep groove ball bearings, angular contact ball bearings, and cylindrical roller bearings and tapered roller bearing.
　　 S0910C(S9912C) multi-functional bearing vibration measuring instrument is the latest intelligent bearing vibration measuring instrument we developed. The system uses computer and digital signal processing technology; synthetically assess the signals tested in the time domain and frequency domain. The measurement results are in line with the bearing vibration assessment on related national technical criteria and are helpful to diagnose the quality of the measured bearing.

Feature

• Bearing vibration measuring instrument can show the vibration value of low, medium, high and pass frequency (50～10000Hz) and single peak of vibration signals. The speakers could output “abnormal sound” simultaneously when the bearing rotating. The measurement results are in line with the bearing vibration assessment on related national technical criteria. It also can show the bearing vibration waveform when matched an oscillograph.
• Multi-functional bearing vibration measuring instrument also has the functions below: virtual value, peak value, peak factor, peak frequent, kurtosis, real-time waveform, spectrum analysis chart and so on.
• The spindle in mechanical parts uses hydraulic sliding bearing. And there are two installation ways: vertical type and horizontal type.
• Foundation vibration: bearing vibration measuring instrument≤10～15dB. Steel ball vibration measuring instrument≤26dB.